EasyManua.ls Logo

Chrysler 2017 Pacifica - Page 180

Chrysler 2017 Pacifica
244 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Front Fog Light Indicator
This indicator will illuminate when the front fog lights are on.
Park/Headlight ON Indicator
This indicator will illuminate when the park lights or headlights are turned on.
High Beam Indicator
Indicates that headlights are on high beam.
Vehicle Security Light
Indicates that the vehicle security system is armed.
Low Windshield Washer Fluid Indicator If Equipped
This indicator will illuminate when the windshield washer fluid is low.
Forward Collision Warning (FCW) OFF Indicator
NOTE:
The default status of FCW is “On.” This allows the system to warn you of a possible collision
with the vehicle in front of you.
The forward collision button is located in the Uconnect display.
To turn the FCW system OFF, push the for ward collision button once to turn the system OFF
(telltale will illuminate in the cluster).
Refer to “Forward Collision Warning (FCW)” in “Operating Your Vehicle for further informa-
tion..
Service Forward Collision Warning (FCW) System Indicator Light
This telltale will turn on to indicate that the Forward Collision Warning (FCW) system is not
functioning properly and service is required. Contact your authorized dealer for service.
KeySense Indicator Light
This indicator will illuminate when a KeySense key fob is detected upon startup of the vehicle.
While the KeySense key is in use the vehicle will respond to customized vehicle settings, and
mandatory settings, which were specified when the KeySense key was activated and given a PIN.
LaneSense Indicator Light
This light will appear either white, yellow, or green in the instrument cluster. Depending on which
color it appears, it could mean one of the following:
White The LaneSense Indicator Light turns on and is white when the LaneSense system is
on, and none, or only the left, or right, lane marking has been detected.
Yellow The LaneSense Indicator Light turns yellow when the LaneSense system is on, and
has detected a lane drift situation. It will begin to flash when the system sense the lane has been
approached and the vehicle is in a lane departure situation.
WHAT TO DO IN EMERGENCIES
178

Table of Contents