EasyManua.ls Logo

Chrysler 2017 Pacifica - Page 46

Chrysler 2017 Pacifica
244 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Linking And Unlinking The Remote Keyless Entry Key Fob To Memor y
Your RKE Key Fob can be programmed to recall one of two pre-programmed memory profiles by
pushing the UNLOCK button on the RKE Key Fob.
NOTE:
Before programming your RKE Key Fob you must select the “Personal Settings Linked to Key
Fob feature through the Uconnect Settings. Refer to “Uconnect Settings” in “Multimedia” in
your Owner’s Manual on the DVD for further information.
To program your RKE Key Fob, perform the following:
1. Cycle the vehicle’s ignition to the OFF position.
2. Select a desired memory profile (1) or (2).
NOTE:
If a memory profile has not already been set, refer to "Programming The Memory Feature" in this
section for instructions on how to set a memory profile.
3. Once the profile has been recalled, push and release the SET (S) button on the memory
switch.
4. Push and release button (1) or (2) accordingly. “Memory Profile Set” (1 or 2) will display in the
instrument cluster.
5. Push and release the LOCK button on the RKE Key Fob within 10 seconds.
NOTE:
Your RKE Key Fob can be unlinked to your memory settings by pushing the SET (S) button, and
within 10 seconds, followed by pushing the UNLOCK button on the RKE Key Fob.
Memory Position Recall
NOTE:
The vehicle must be in PARK to recall memory positions. If a recall is attempted when the vehicle
is not in PARK, a message will be displayed in the Instrument Cluster Display.
To recall the memory settings for driver one, push MEMORY button 1 on the driver's door or the
UNLOCK button on the RKE Key Fob linked to memory position 1.
To recall the memory setting for driver two, push MEMORY button 2 on the driver's door or the
UNLOCK button on the RKE Key Fob linked to Memory Position 2.
A recall can be cancelled by pushing any of the MEMORY buttons on the driver's door during
a recall (S, 1, or 2). When a recall is cancelled, the driver's seat stop moving. A delay of one second
will occur before another recall can be selected.
NOTE:
Pushing the mirror adjust switch will cancel the memory mirror recall.
GETTING STARTED
44

Table of Contents

Other manuals for Chrysler 2017 Pacifica

Related product manuals