1. Push and release the Stow ‘n Go Assist button. The front seat cushion and seat back will move
as necessary to a location that will allow space for the second row Stow ‘n Go seat movement.
2. Perform the second row Stow ‘n Go seat movement. Refer to “Second Row Stow ‘n Go” for
further information.
3. Push and release the Stow ‘n Go Assist button a second time. The front seat cushion and seat
back will return to the original starting location.
NOTE:
• To abort seat operation while seat is in motion, push the Stow n’ Go Assist button, or push the
front power seat button to stop the seat movement. Pushing the Stow ‘n Go Assist button
again will return the front seat to the original starting location.
• The Stow ‘n Go Assist system includes obstacle detection. When the system detects an
obstacle, the seat will stop, reverse direction, and return to the previous location. A message
will be displayed in the instrument cluster indicating that an obstacle has been detected.
• If the front seat is already in a location that will allow space for Stow ‘n Go of the second row
seat, the front seat will not move and a message will be displayed in the instrument cluster.
• If calibration of the front seat is lost, the seat will automatically re-calibrate when the Stow ‘n
Go Assist button is pushed. This may result in the seat cushion moving forward and downward,
before moving to the location that will allow space for the second row Stow ‘n Go seat
movement.
Second Row Stow 'n Go
For Manual Seats: To stow the seat in the floor, move the front seat all the way forward using the
manual seat adjustment bar. Move the seat back all the way forward using the recliner handle
located on the outboard side of the cushion. Move the seat height to at least mid position using
the height adjuster handle in the outboard side of the cushion.
For Power Seats: Push the Stow ‘n Go Assist button located on the B pillar trim (if equipped.)
Refer to "Stow 'n Go Assist - If Equipped" in this section for instructions.
1. To access the storage bin, place the lock rod in the locked position.
NOTE:
• Push the lock rod inward for the locked position.
• Pull outward on the lock rod for the unlocked position.
• For information on storage bin function with the seats rearward refer to “Internal Equip-
ment” in “Getting To Know Your Vehicle” in the Owner’s Manual on the DVD for further
information.
2. Pull the latch located near the second row seat to open the floor panel.
3. Pull the floor panel and position it toward the front seats while folding the top half down and
rest it against the front seats.
4. Stow the seat by grabbing the strap on the lower part of the back seat and guide the seat into
the tub.
GETTING STARTED
49
To Next Page
