Chuango LTE-400 - Remote Phone Operation; Keypad Commands for Remote Control

24
Remote Phone Operation
User can store phone number in App [Setting]-[Advance Settings]-[SMS/Phone Call
notication].
The hub sends SMS message and calls the stored numbers in case of alarm, the system
is in a 1-minute-monitoring state, when the phone call is answered, then the user is able
to press the number keys on the smart phone to control the system remotely. If no key
command is operated during this state, the system will hang up the call and continue to
call the next stored number.
User can also use the stored phone number to call the SIM card number of the hub to
remotely control the system.
Note: Phone numbers which have not been authorized by the hub are unable to control
the system.
Keypad Commands
Phone
Button
Function
0
Disarm
1 Arm
3 Listen in
# Hang Up
6 Turn Off Siren
9 Turn On Siren
* Two-Way Talk
Note: In case of emergency, app alert notications will be sent rstly, and then SMS and phone
calls will follow immediately.