Need help?Do you have a question about the Chuango LTE-400 and is the answer not in the manual?
Details the components and indicators of the Smart Hub, including front, top, and back sides.
Explains the meaning of different indicator lights on the Hub for Wi-Fi, Status, and Cellular.
Guide to determine if the system is connected via WiFi or Cellular based on indicator lights.
Explains the tamper switch functionality on the door/window contact.
Describes how to identify a low battery on the door/window contact.
Describes the tamper switch function on the PIR motion detector.
Illustrates the detection range and angle of the PIR motion detector.
Explains the dual detection window design for improved accuracy and pet immunity.
Details the Testing Mode and Power Saving Mode of the motion detector.
Instructions on how to download the "DreamCatcher Life" app from app stores.
Guide on creating an account and logging into the app.
Steps to add the Smart Hub to the app, including Wi-Fi connection methods.
Instructions for configuring the hub using a SIM card when Wi-Fi is unavailable.
Explains the different system modes like Home Arm, Disarm, and Arm.
Covers adding new accessories and checking accessory status.
Instructions on how to rename and set device types and zone modes for accessories.
How to rename the hub, view its information, and update firmware.
How to enable arm/disarm alert sounds for an optional wireless outdoor siren.
Instructions for programming automatic arming and disarming schedules for the system.
Configuration of Exit Delay Time and Entry Delay Time for alarm delays.
How to use the Test Mode to check sensor functionality without triggering alarms.
How to delete the hub from the app and its associated sharing settings.
Details the functions available on the app's main screen, including Home Arm, Disarm, and SOS.
Explains how devices are displayed and managed by rooms in the app.
Instructions for adding home details, rooms, and managing user memberships (Admin/User).
How the hub sends SMS and calls stored numbers for alarm notifications.
How to view, share, and manage devices within the app.
Checking alerts for arm/disarm events and bulletins for system notifications.
Finding answers, providing feedback, and configuring app notification preferences.
Lists the keypad commands for remote system control via phone.
Recommendations for placing the hub for the best signal.
Step-by-step guide for powering up and installing the door/window contact sensor.
Instructions on choosing a location and mounting the PIR motion detector.
Steps for testing and adjusting the PIR motion detector's angle.
Instructions for replacing batteries in the remote control, door/window contact, and PIR detector.
How to reset the hub to its factory default settings.
Detailed technical specifications for the Smart Hub.
Detailed technical specifications for the Remote Control.
Technical specifications for the Door/Window Contact sensor.
Technical specifications for the PIR Motion Detector.
General| Model | LTE-400 |
|---|---|
| Category | Security System |
| Type | Wireless Alarm System |
| Network | 4G LTE |
| Wireless Frequency | 433MHz |
| Operating Temperature | -10°C to 50°C |
| Humidity | 10% to 90% RH |
| Connectivity | LTE, Wi-Fi |
| Siren | Built-in siren |
| Backup Battery | Lithium battery |
| Sensors Supported | Door/Window, Motion, Smoke, Gas |
| Mobile App | Chuango App |
To Next Page
