Chuango LTE-400 - PIR Motion Detector; Tamper Switch Functionality; Detection Area

06
Pet-Immune PIR Motion Detector
The motion detector is designed for use on interior walls and is set to Home Mode by
default. Whenever the sensor detects movement (only while the alarm is armed), a push
notication including the sensor name will automatically be sent to the registered users,
and the hub’s internal siren will sound immediately.
2.5m
Triggers
when ＞ 2cm
LED blinks once
1. Detection Window
2. LED Indicator
3. Snap Joint
4. Test Button
5. Bracket
2.5m
Triggers
when ＞ 2cm
LED blinks once
Zone Setting
Infrared Sensor
Infrared Sensor
LED ON / OFF
Tamper Switch
Blinks continuously Motion detector is performing a self-test
Blinks once Motion detected
Blinks once every 3 seconds
Low battery indication, please change the battery
immediately
Tamper Switch
The tamper switch will trigger an alarm notication if an unauthorized attempt is made to
remove the cover of the detector from its housing.
Detection Area
2.5m
Triggers
when ＞ 2cm
LED blinks once
Top View
Side View