04
Remote Control
The remote control can be used to Arm, Home Arm and Disarm the system. It can also
be used to trigger an emergency alarm (SOS) manually.
Arm Button
LED Indicator
Disarm Button
SOS Button
Home Arm Button
Button System Status
All sensors will be Armed. Set to this mode when the property is
unoccupied.
The system will be Disarmed, no sensor will trigger the alarm.
Note: When system is set to ‘Disarm’, all re, smoke and water sensors
(purchased separately) will remain active as they are factory set to 24-
Hour Zone.
Sets the system to Home mode. Sensors that are set to the Home Zone
will not be Armed while all the others will be Armed. This mode allows
a select set of sensors (Sensor in Arm Zone and 24-Hour Zone, for
example, door/ window contacts) to be Armed, allowing the occupier
freedom of movement within the property.
The SOS button will trigger the alarm and send an alert notication to
registered users regardless of the hub mode.
To Next Page
Loading...
