CIARA Astro SN-6310
- 9 -
1.3.1 Recovery from CIARA recovery DVD
Before you start this procedure please back up all your important information, the recovery media will erase all data on HDD
before installation.
Insert the Recovery DVD and restart the system.
1- When prompted, press any key to boot from the DVD.
The recovery image will then start.
2- Accept the EULA and press on Continue.
3- Select 32 bit or 64 bit and press Start System Recovery
4- A pop up will then open warning you that all the data will be lost.
If all your files are already saved, press OK.
5- The recovery will take around 30 minutes to complete. A window
will show you the process of the recovery, once completed Eject the
DVD then press OK. The system will then reboot.
NOTE: All drivers required for your system will be already installed except
for components that were not part of your original purchase
To Next Page
Loading...