viii Contents
3930 Service Delivery Switch Hardware Installation and Start-up Manual
009-3223-001 Standard Revision E
Copyright
©
2012-2014 Ciena
®
Corporation January 2014
Turning Up the System 3-1
Logging in through the Serial Console Port 3-2
Creating a New User Account 3-2
Deleting a User Account 3-3
Managing Licenses 3-3
Configuring the Remote Management Interface 3-4
Accessing the CLI Using Telnet 3-5
Configuring the Local Management Interface 3-5
Configuring an Interface using DHCP 3-6
Setting the System Host Name 3-6
Logging Out of the System 3-7
3-1 Logging in through the Serial Console Port 3-8
3-2 Creating a new user account 3-9
3-3 Deleting a user account 3-10
3-4 Managing Licenses 3-11
3-5 Configuring the Remote Management Interface 3-12
3-6 Accessing the CLI using Telnet 3-13
3-7 Configuring the Local Management Interface 3-14
3-8 Configuring an Interface using DHCP 3-15
3-9 Setting the System Host Name 3-16
3-10 Logging out of the System 3-17
Maintenance 4-1
Replacing a Power Supply Module 4-1
Simplex Power 4-1
Redundant Power 4-1
AC Power Supplies 4-2
DC Power Supplies 4-2
4-1 Replacing an AC Power Supply 4-3
4-2 Replacing a DC Power Supply 4-4
LED Overview 5-1
System Reset Button and LED Behavior 5-1
Unit Status LEDs 5-2
Power Supply LEDs 5-4
10 Gigabit Ethernet Port LEDs 5-5
10/100/1000 Mbps Port LEDs 5-6
Local Management Port LEDs 5-7
Sync Port 5-9
Technical Specifications 6-1
Regulatory Compliance 7-1
Canada 7-4
CE Compliance 7-4
FCC Statement 7-4
To Next Page
Loading...
Need help?
General
