CILICO CT20 - Page 24

24
Delay Between Re-Read
The delay time between re-read of above scan modes could be set by the following
barcode.
For Example: 1. Read the "Enter Setup" barcode;
2. Read the "Auto Power off Mode" barcode;
3. Read the "1s" of the time interval between each scanning barcode;
4. Read the "Exit with Save" barcode.
Then enter the Auto Power Off Mode.
400ms
800ms
1s
（*）2s
3s
5s
10s
15s
Enter Setup
Exit with Save
Exit without Save