CILICO CT20 - Codabar

55
3.1 CODABAR
Decide whether or not to enable Codabar. The CT20 Scanner defaults disable Codabar.
Note: Read the "Disable Codabar" barcode will make the scanner can not read the
Codabar barcode. Thus, if the scanner can not read the Codabar barcode, please trying to
read "Enable Codabar" to reset.
For example: Enable Codabar.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Codabar" barcode;
3. Read the "Exit with Save" barcode.
Enable Codabar
（*）Disable Codabar
Enter Setup
Exit with Save
Exit without Save