CILICO CT20 - Msi

71
3.13 MSI
Decide whether or not to enable MSI. The CT20 Scanner defaults disable MSI.
Note: Read the "Disable MSI" barcode will make the scanner can not read the MSI
barcode. Thus, if the scanner can not read the MSI barcode, please trying to read "Enable
MSI" to reset.
For example: Enable MSI.
1. Read the "Enter Setup" barcode;
2. Read the "Enable MSI" barcode;
3. Read the "Exit with Save" barcode.
Enable MSI
（*）Disable MSI
Enter Setup
Exit with Save
Exit without Save