CIM ME1000S - Page 26

2 - MACHINE DESCRIPTION
Dati tecnici ME1000S
ME1000S - User Manual
26 - 128
abcd efg
123
1
1
3
3
4
Embossing
After picking up the tag (1), the gripper unit (3) transfers it to the stamping area.
The tag is positioned under the drum which, by rotating, stamps the character on the tag by means of the
hammer (4).
Unloading
When the embossing cycle has nished, the gripper unit (3) moves the tag (1) to the unloading area,
where it is ejected.