CIM ME1000S - Using the Machine

6 - USE AND OPERATION
USO DELLA MACCHINA (ME)
ME1000S - User Manual
47 - 128
A
1
2
4
3
6.1 Using the machine
The machine is not designed for continuous use.
The Powertag
®
software installed on a PC (1), connected to the machine via the appropriate socket (2), allows the
operator to manage all the functions and tag processing parameters.
The control panel (3), on the other hand, allows the operator to carry out basic tests and to set up congurations
directly from the machine.
CAUTION
The screens of the control panel (3) will be described in the following pages.
For further information on the use of the PowerTag
®
software, please see the specic manual
provided.
To power up the machine, use the power on button (4) on the back.