3 - SAFETY
Dispositivi di sicurezza (ME1000S)
ME1000S - User Manual
36 - 128
1
3
1
1
2
A
B
When the guard (1) is opened (A), the safety micro switch (3) disconnects all power supplies and stops the machine's
internal units to allow the operator and maintenance technicians to carry out maintenance, load plates, replace
consumables and make adjustments.
The guard (1) must be closed (B) and the machine reset in order to resume processing.
WARNING
Any plates in the workstations when the guard is opened will subsequently be rejected when the
machine is restarted.
To Next Page
Loading...
