CIMLINE 105 - Fluid and Components Specifications

- 38 -
Cold oil level
Fluid and Components Specifications
WARNING: Only the oil specified or equal may be used in this system. (Always check
your local and state regulations before disposal).
WARNING: The CIMLINE temperature high limit is set at 550º F. Do not exceed this
setting.
A
NOTE: A dipstick (A) is provided for checking oil level when cold.
501ledoM522ledoM
yticapaCevreseRciluardyHsnollaG03snollaG03
epyTliOciluardyHviuqero23VMoconoCviuqero23VMoconoC
yticapaCleuFleseiDsnollaG03snollaG03
yticapaCleuFenaporP
elttobPL.sbl001)1(
lanoitposelttob)2(
elttobPL.sbl001)2(
epyTleuFleseiDD2.oN579DMTSAD2.oN579DMTSA
yticapaCliOrefsnarTtaeHsnollaG5.91snollaG72
epyTliOrefsnarTtaeHegaptxennosnoitacificepSeeS
gnitteSfeileRevirDnoitatigAISP0011ISP008
gnitteSfeileRevirDpmuPlairetaMISP0051ISP0051
tnemecalpsiDpmuPlairetaM.veR/laG11..veR/laG11.
tuptuOmumixaMpmuPlairetaM
erusserP
ISP521ISP521