CIMLINE MATRIX 1500 - Fluid and Components Specifications

- 22 -
Fluid and Components Specifications
0051ledoM
yticapaCevreseRciluardyHsnollaG52
*epyTliOciluardyH
ro23VMoconoC
viuqe
yticapaCleuFleseiDsnollaG52
epyTleuFleseiDD2.oN579DMTSA
yticapaCliOrefsnarTtaeHsnollaG22
epyTliOrefsnarTtaeH
snoitacificepSeeS
egaptxenno
gnitteSfeileRevirDnoitatigAISP0011
gnitteSfeileRevirDpmuPlairetaMISP0051
tnemecalpsiDpmuPlairetaM.veR/laG*
WARNING: Only the oil specified or equal may be used in this system. (Always
check your local and state regulations before disposal).
NOTE: A dipstick (A) is provided for checking oil level when cold.
*This is a petroleum based product, it can be mixed with other petroleum based hydraulic
oils such as Dextron III or common straight weight oils. We recommend that you do not
mix oil brands. Mixing any oils (engine oil, transmission fluid, etc.) adversely affects each
manufacturers formula.
Cold oil
level
A