MC55i Terminal Hardware Interface Description
5.1 Mounting Example
43
MC55i_Terminal_HD_v01.201a Page 43 of 47 2010-04-16
Confidential / Released
5.1 Mounting Example
The MC55i Terminal can be attached e.g. to a 35mm top-hat rail installation using two
M3 x 50mm screws and an additional fixture element, see Figure 15. In case you wish to order
the recommended mounting kit, please refer to Chapter 7 for detailed information.
Figure 14: Recommended screws Figure 15: Attaching MC55i Terminal to a top-hat rail
To Next Page
Loading...