CipherLab 8200 Reference Manual

39
Chapter 3 System Menu
3.2.3 CONTRAST
Set the contrast level for the LCD.
 Press the arrow keys [Up] and [Down] to adjust the contrast level.
3.2.4 AUTO OFF
The mobile computer will be turned off automatically when no operation is taking place
during a specified period of time. Enter a value between 0 and 999 (minute).
Note: To disable this function, enter 0.
3.2.5 POWER ON (& WAKEUP EVENT) OPTIONS
Set the startup screen once the mobile computer is turned on, and specify which events
will wake up the mobile computer:
Power On Options
Press the arrow keys [Up] and [Down] to select “Program Resume” or “Program Restart”, and then
press [ENTER].
 Program Resume: When selected, the mobile computer will start from the last session of
program before it is turned off.
 Program Restart: When selected, the mobile computer will start from the first session of the
program.
WakeUp Events
The specified events can wake up the mobile computer when the conditions are met. Press the
arrow keys [Up] and [Down] to select a specific event, and press [ENTER] to determine when it is
treated as a wake-up event or not.
 PwrKey: If yes, it will wake up the mobile computer upon pressing the Power key.
 RS232: If yes, it will wake up the mobile computer upon connecting the RS-232 cable.
 USB: If yes, it will wake up the mobile computer upon connecting the USB cable.
 Charging: If yes, it will wake up the mobile computer upon getting charged via the cradle or
direct charging.
 Charged: If yes, it will wake up the mobile computer upon completion of charging.
 Alarm: If yes, it will wake up the mobile computer upon the alarm time is up. Alarm can be set
up through programming only.

CipherLab 8200 Specifications

General

IP Rating	IP54
Display Type	LCD
Barcode Scanner	Laser
Connectivity	RS-232
I/O Ports	RS-232