Cisco 1100 Series Hardware Installation Guide

Connect Power Cable
Power supply of the Cisco 1100 Terminal Gateway Routers is through AC and DC power adapter.
This equipment must be grounded. To reduce the risk of electric shock, never defeat the ground conductor or
operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical
inspection authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Warning
For HVDC and DC systems:
To reduce risk of electric shock and fire, a readily accessible two-poled disconnect device must be incorporated
in the fixed wiring. Statement 1022
Warning
Hardware Installation Guide for the Cisco 1100 Terminal Gateway
25
Install and Connect the Router
Connect Power Cable

Cisco 1100 Series Specifications

General

Form Factor	Desktop
Model	Cisco 1100 Series
Integrated Wi-Fi	Yes, 802.11ac Wave 2
Security	Firewall, VPN (IPsec, DMVPN, FlexVPN), intrusion prevention, content filtering
Management	Cisco IOS XE
Power Supply	External power adapter
Power	12V DC
Mounting	Desktop
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20 to 70°C (-4 to 158°F)