Cisco 2500 Series Installation And Configuration Guide

Table 4-1: ISDN Switch Types
Country: ISDN Switch Type Description
Australia
basic-ts013
Australian TS013 switches
Europe
basic-1tr6
German 1TR6 ISDN switches
basic-nwnet3
Norwegian NET3 ISDN switches (phase 1)
basic-net3
NET3 ISDN switches (UK and others)
basic-net5
NET5 switches (UK and Europe)
vn2
French VN2 ISDN switches
vn3
French VN3 ISDN switches
basic-1tr6
German 1TR6 ISDN switches
basic-nwnet3
Norwegian NET3 ISDN switches (phase 1)
Japan
ntt
Japanese NTT ISDN switches
New Zealand
basic-nznet3
New Zealand NET3 switches
North America
basic-5ess
AT&T basic rate switches
basic-dms100
NT DMS-100 basic rate switches
basic-ni1
National ISDN-1 switches
Configuring the ISDN BRI Interface
This section explains how to configure the ISDN BRI interface. If an ISDN BRI WAN module is not installed
in your router, skip this section and proceed with the next section, "Configuring the Ethernet or Token Ring
Interfaces."
The ISDN BRI interface is configured to allow connection to ISDN WANs. Take the following steps to
Configuring the Router
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis2500/2520/2520_23/c2520cfg.htm (8 of 16) [10/27/2000 3:07:51 PM]

Cisco 2500 Series Specifications

General

Brand	Cisco
Model	2500 Series
Category	Controller
Language	English