Cisco 3200 Series - Console Port Signals; AUX Port Signals

1-17
Cisco 3200 Series Router Hardware Reference
OL-5816-10
Chapter 1 Cisco 3200 Rugged Enclosures
Console Port Signals
You can connect to the router or to a Wireless Mobile Interface Card (WMIC) by using a console cable
to connect to the console interfaces.
The console port signals:
• Are asynchronous serial DCE
• Support 9.6-kbps, 19.2-kbps, 38.4-kbps, 57.6-kbps, and 115.2-kbps baud rates
• Support full modem control of DTR, DSR, RTS, and CTS signals
AUX Port Signals
The AUX port is a serial asynchronous port that supports the following speeds:
• Cisco 3270 Rugged Router card in the Cisco 3270 Router: 1.2 kbps, 2.4 kbps, 4.8 kbps, 9.6 kbps,
19.2
kbps, 38.4 kbps, 57.6 kbps, 115.2 kbps, and 460 kbps.
• Mobile Access Router Card (MARC) in the Cisco 3230 Router: 1.2 kbps, 2.4 kbps, 4.8 kbps,
9.6
kbps, 19.2 kbps, 38.4 kbps, 57.6 kbps, and 115.2 kbps.
The AUX port supports the following:
• Asynchronous serial DTE
• 5 to 8 data bits
• 1, 1.5, or 2 stop bits
• Odd, even, or no parity
• Flow control by using RTS, CTS, DTR, and CDC signals