Cisco 3200 Series - Removing the Antenna End Cap; CHAPTER 3 Replacing Cards in the Cisco ISR 3270 Rugged Enclosure; Card Replacement Process

Contents
4
Cisco 3200 Series Router Hardware Reference
OL-5816-10
Cisco 3270 Rugged Router Card Power Requirements 2-4
Power Connections (AUX) 2-4
Hardware Encryption Processor 2-4
Ethernet Port Speed and Duplex Mode 2-6
Cisco 3270 Rugged Router Card Encryption Module 2-7
Security Engine Features 2-7
Temperature Sensor 2-8
Cisco 3270 Rugged Router Card MAC Address Allocation 2-8
CHAPTER 3 Mobile Access Router Card 3-1
MARC Component Systems 3-2
MARC Power Requirements 3-3
MARC Router Signals 3-3
Fast Ethernet Signals on the MARC 3-3
Console and Auxiliary Signals 3-4
CHAPTER 4 Fast Ethernet Switch Mobile Interface Card 4-1
Autonegotiation and Auto-MDI/MDIX 4-2
MAC Address Allocation 4-2
FESMIC Component Systems 4-3
Signals for the FESMIC 4-4
FESMIC Rotary Switch Positions 4-5
CHAPTER 5 Serial Mobile Interface Card 5-1
SMIC Component Systems 5-2
Signals for the SMIC 5-3
4-Port SMIC Rotary Switch Positions 5-3
2-port SMIC Rotary Switch Positions 5-4
SMIC LED Signals 5-4
SMIC Power Consumption 5-5
CHAPTER 6 Wireless Mobile Interface Cards 6-1
WMIC Component Systems 6-1
Antenna Connector 6-2
WMIC Console and Fast Ethernet Ports 6-2
Fast Ethernet Signals on the WMIC 6-3
LED Behavior 6-4
Key Features 6-5