Cisco 3825 - Page 355

Index
IN-3
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
show umts-iub congestion A-102
show umts-iub efficiency A-103
show umts-iub errors A-104
show umts-iub packets A-106
show umts-iub peering A-107
show umts-iub pvc A-110
show umts-iub traffic A-111
show version 4-2
show xconnect all A-112
snmp-server enable traps ipran A-115
snmp-server enable traps ipran alarm-gsm A-116
snmp-server enable traps ipran alarm-umts A-117
snmp-server enable traps ipran util A-118
standalone A-119
standby use-interface A-120
umts-iub backhaul-oam A-122
umts-iub backhaul-timer A-123
umts-iub congestion-control A-124
umts-iub congestion priority A-125
umts-iub local A-126
umts-iub remote A-127
umts-iub set dscp A-128, A-129
umts-iub set peering dscp A-130
umts local A-131
umts remote A-132
undo 2-3
xconnect A-133
xconnect logging redundancy A-136
configuration
before starting router 3-3
completing 3-7
example configurations 4-61
first time 3-1
saving 2-3, 3-7, 4-61
sequence 4-6
configuration statements for
CISCO-IP-RAN-BACKHAUL-MIB
1-8
configuring
backhaul links 4-9
controllers
E1 interface 4-11
for SNMP support 4-33
GE interfaces 4-8
global parameters 3-4
gsm-abis congestion critical A-23
gsm-abis congestion onset A-27
gsm-abis jitter A-29
GSM-Abis links 4-20
gsm-abis local A-31
gsm-abis remote A-32
hostname 4-6
IP address 4-8
multilink interface 4-9
password 4-6
redundancy 4-28
UMTS links 4-24
controllers
E1 configuration 4-11
D
disable, EADI 4-20
duplex mode, setting duplex mode 4-8
E
E1 controllers 4-11
EADI
disable 4-20
enable mode 2-2, 4-61
ethernet over MPLS 1-23
ethernet PWE3 redundancy 1-25
extended availability drop and insert
See EADI