Procedure
Step 1
Remove the handset from the cradle and pull the plastic tab from the handset rest.
Step 2
Rotate the tab 180 degrees.
Step 3
Hold the tab between two fingers, with the corner notches facing you.
Step 4
Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from
the top of the rotated tab.
Step 5
Return the handset to the handset rest.
Cisco Unified SIP Phone 3905 User Guide for Cisco Unified Communications Manager 8.6
OL-23424-01 7
Features of Your Cisco Unified SIP Phone 3905
Adjust the Handset Rest
To Next Page
Loading...
