x
Cisco ASA 5500 Series Hardware Installation Guide
OL-10089-01
About This Guide
Installation Warnings
Installation Warnings
Be sure to read the Regulatory Compliance and Safety Information for the Cisco ASA 5500 document that
accompanied this device before installing the chassis. This document contains important safety information.
This section includes the following warnings:
• Power Supply Disconnection Warning, page x
• Jewelry Removal Warning, page x
• Wrist Strap Warning, page xi
• Work During Lightning Activity Warning, page xi
• Installation Instructions Warning, page xi
• Chassis Warning for Rack-Mounting and Servicing, page xi
• Short-Circuit Protection Warning, page xi
• SELV Circuit Warning, page xi
• Ground Conductor Warning, page xi
• Blank Faceplates and Cover Panels Warning, page xii
• Product Disposal Warning, page xii
• Short-Circuit Protection Warning, page xii
• Compliance with Local and National Electrical Codes Warning, page xii
• DC Power Connection Warning, page xii
• AC Power Disconnection Warning, page xii
• TN Power Warning, page xii
• 48 VDC Power System, page xiii
• Multiple Power Cord, page xiii
• Circuit Breaker (15A) Warning, page xiii
• Grounded Equipment Warning, page xiii
• Safety Cover Requirement, page xiii
• Faceplates and Cover Panel Requirement, page xiii
Power Supply Disconnection Warning
Warning
Before working on a chassis or working near power supplies, unplug the power cord on AC units;
disconnect the power at the circuit breaker on DC units.
Statement 12
Jewelry Removal Warning
Warning
Before working on equipment that is connected to power lines, remove jewelry (including rings,
necklaces, and watches). Metal objects will heat up when connected to power and ground and can
cause serious burns or weld the metal object to the terminals.
Statement 43
To Next Page
Loading...
Need help?
General
