Description and Default ValueParameter Name
Provisioning State (a numeric string):
-1 = explicit resync request
0 = power-up resync
1 = periodic resync
2 = resync failed, retry attempt
PRVST
Upgrade State (a numeric string):
1 = first upgrade attempt
2 = upgrade failed, retry attempt
UPGST
Result message (ERR) of previous upgrade attempt; for example http_get
failed.
UPGERR
Seconds since last resync attempt.PRVTMR
Seconds since last upgrade attempt.UPGTMR
Seconds since Line 1 lost registration with SIP server.REGTMR1
Seconds since Line 2 lost registration with SIP server.REGTMR2
Legacy macro name.UPGCOND
File access scheme, one of TFTP, HTTP, or HTTPS, as obtained after
parsing resync or upgrade URL.
SCHEME
Request target server host name, as obtained after parsing resync or
upgrade URL.
SERV
Request target server IP address, as obtained after parsing resync or
upgrade URL, possibly following DNS lookup.
SERVIP
Request target UDP/TCP port, as obtained after parsing resync or
upgrade URL.
PORT
Request target file path, as obtained after parsing resync or upgrade
URL.
PATH
Result message of resync or upgrade attempt. Only useful in generating
result syslog messages. The value is preserved in the UPGERR variable
in the case of upgrade attempts.
ERR
The contents of the Line n UserID configuration parameter.UIDn
Extension Mobility StatusEMS
Cisco IP Phone 6800 Series Multiplatform Phones Provisioning Guide
69
Provisioning Parameters
Macro Expansion Variables
To Next Page
Loading...
Need help?
General
