Search for and Dial a Contact while on a Call
Procedure
Step 1
Press the Contacts button
.
Step 2
Press the Personal Directory or Corporate Directory soft key.
Step 3
Press the Select button.
Step 4
For Personal Directory, enter the User ID and PIN.
Step 5
Press the Submit soft key or press Cancel to exit.
Step 6
For Corporate Directory, select any of the following criteria to search for a co-worker:
• First name
• Last name
• Number
Step 7
Enter the required information.
Step 8
Select Search > Dial.
Place a Call
Use one of the following methods to place a call:
• Lift the handset and dial the number.
• Dial the number, and then lift the handset.
• Dial the number, and then press the Dial soft key.
• Dial the number, and then press the Speaker button.
• Press the line button for your extension, and then dial the number.
• Press the Speaker button , and then dial the number.
• Press the New Call soft key, and then dial the number.
• If you are using a headset, press the Headset button
, and then dial the number.
• Dial the number, and then press the Headset button
.
• If you have established speed-dial numbers, press a Speed-dial button.
• If you have selected a number from a directory, press the New Call soft key.
• If you have selected a number from a directory, press the Line / Headset / Speaker button.
Cisco Unified IP Phone 6945 User Guide for Cisco Unified Communications Manager Express Version 8.8 (SCCP)
22 OL-24413-01
Operating Your Phone
Search for and Dial a Contact while on a Call
To Next Page
Loading...
Need help?
General
