4-21
Cisco 7200 VXR Installation and Configuration Guide
OL-5013-09
Chapter 4 Observing System Startup and Performing a Basic Configuration
Viewing Your System Configuration
Hardware date code :20000413
Top Assy. Part Number :800-07114-01
PCB Serial Number :PROT-------
EEPROM format version 4
EEPROM contents (hex):
0x00:04 FF 40 02 15 41 00 00 42 30 31 05 FF 83 01 31
0x10:2E 9D C0 46 03 20 00 1B CA 01 C1 8B 50 52 4F 54
0x20:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Slot 2:
Dual Port FastEthernet (RJ45) Port adapter, 2 ports
Port adapter is analyzed
Port adapter insertion time 1d19h ago
EEPROM contents at hardware discovery:
Hardware Revision :1.0
PCB Serial Number :MIC04412B9X
Part Number :73-5419-04
Board Revision :A0
RMA Test History :00
RMA Number :0-0-0-0
RMA History :00
Deviation Number :0-0
Product Number :PA-2FE-TX
Top Assy. Part Number :800-08350-04
EEPROM format version 4
EEPROM contents (hex):
0x00:04 FF 40 02 24 41 01 00 C1 8B 4D 49 43 30 34 34
0x10:31 32 42 39 58 82 49 15 2B 04 42 41 30 03 00 81
0x20:00 00 00 00 04 00 80 00 00 00 00 CB 94 50 41 2D
0x30:32 46 45 2D 54 58 20 20 20 20 20 20 20 20 20 20
0x40:20 C0 46 03 20 00 20 9E 04 FF FF FF FF FF FF FF
0x50:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Slot 5:
Fast-ethernet (TX-ISL) Port adapter, 1 port
Port adapter is analyzed
Port adapter insertion time 1d19h ago
EEPROM contents at hardware discovery:
Hardware revision 1.2 Board revision D0
Serial number 12384576 Part number 73-1688-04
Test history 0x0 RMA number 00-00-00
EEPROM format version 1
EEPROM contents (hex):
0x20:01 11 01 02 00 BC F9 40 49 06 98 04 00 00 00 00
0x30:68 00 00 00 99 06 01 00 FF FF FF FF FF FF FF FF
For specific information on the show version, show diag and other software commands, refer to the
modular configuration and modular command reference publications in the Cisco
IOS software
configuration documentation set that corresponds to the software release installed on your Cisco
hardware.
To Next Page
Loading...
