Send document comments to nexus7k-docfeedback@cisco.com
2-56
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
OL-23435-03
Chapter 2 Configuring Basic Interface Parameters
Additional References
Clearing Interface Counters
You can clear the Ethernet and management interface counters using the clear counters command. You
can perform this task from the configuration mode or interface configuration mode.
SUMMARY STEPS
1. clear counters interface
2. show interface
DETAILED STEPS
This example shows how to clear and reset the counters on Ethernet port 5/5:
switch# clear counters ethernet 5/5
switch#
Additional References
For additional information related to implementing Feature-1, see the following sections:
• Related Documents, page 2-57
• Standards, page 2-57
• Feature History for Configuring Basic Interface Parameters, page 2-57
Command Purpose
Step 1
clear counters interface
Example:
switch# clear counters ethernet 2/1
switch#
Clears the interface counters.
Step 2
show interface interface
Example:
switch# show interface vlan 10
switch#
Displays the interface status, which includes the counters.
To Next Page
Loading...
Need help?
General
