The following table describes the IP Phone 7800 Series buttons and hardware.
Handset and Handset light strip
Indicates whether you have an incoming call (flashing red) or a
new voice message (steady red).
Programmable feature buttons
and line buttons
Access your phone lines, features, and call sessions.
For more information, see Softkey, Line, and Feature Buttons.
The IP Phone 7811 does not have programmable feature buttons
or line buttons.
Access functions and services.
For more information, see Softkey, Line, and Feature Buttons.
Navigation ring and Select button. Scroll through menus,
highlight items, and select the highlighted item.
Hold/Resume, Conference,
and Transfer
Hold/Resume Place an active call on hold and resume the
held call.
Conference Create a conference call.
Transfer Transfer a call.
Speakerphone, Mute,
and Headset
Speakerphone Toggle the speakerphone on or off. When the
speakerphone is on, the button is lit.
Mute Toggle the microphone on or off. When the
microphone is muted, the button is lit.
Headset Toggle the headset on. When the headset is on, the
button is lit. To leave headset mode, you pick up the handset or
selectSpeakerphone .
The IP Phone 7811 does not have a Headsetbutton.
Contacts, Applications,
and Messages
Contacts Access personal and corporate directories.
Applications Access call history, user preferences, phone
settings, and phone model information.
Messages Autodial your voice messaging system.
Adjust the handset, headset, and speakerphone volume (off hook)
and the ringer volume(on hook).
Table 2. IP Phone 7800 Series Buttons and Features
To Next Page
Loading...
Need help?
General
