Cisco MPP Phones
Manual Reconfiguration Guide
** If you are having trouble flashing your device with these URLs, please contact
your technical support team for assistance. (note the / at the end of the url, it is
required)
If the station assignment process was properly completed prior to the reboot, the
device will boot into a station specific assigned/usable state. If not, the device will
boot into a default unassigned/unusable state, and will remain in this state until the
site administrator has completed the station assignment process. If this occurs,
contact your site administrator and request that station assignment be completed for
the device in question.
To Previous Page
Loading...
