Cisco 7911

Abbreviated Dialing
Abbreviated Dialing lets you create up to 100 personal 2-digit speed dial codes.
 To program an Abbreviated Dial Code- Lift the handset and dial 75*
 Follow the voice prompts
 To modify an Abbreviated Dial Code
 Lift the handset and dial 75*
 Follow the instructions to program a new Abbreviated Dial Code using the same Abbreviated Dial Code
To use an Abbreviated Dial Code:
 Lift the handset and dial *3
 Enter the desired 2-digit Abbreviated Dial Code
Speed Dial
Speed dial lets you assign favorite telephone numbers to speed dial buttons for one-touch dialing. Speed dials are
configured by your service administrator.
To Use a Speed Dial:
 Lift the handset
 Use the Up/Down Navigation Buttons to select the desired Speed Dial entry
 Press the Dial softkey
Receiving a Call
 Internal Calls - one ring
 External Calls - two rings
To Answer an Incoming Call:
 Lift the handset
To Answer a 2nd Call While on a Call:
 Press the Answer softkey. The original caller will be placed on hold while you are connected to the
2nd caller.
To Toggle Between Active Calls:
 Press the Hold softkey (Toggle between the two calls using the green up/down arrows & select by pressing the
flashing red button to the left of the arrows.)