Cisco 7911 User Guide

Transfer
Transfer enables you to transfer an active call to another extension or telephone number.
To transfer an active call:
 Press the More softkey
 Press the Trnsfer softkey
 Dial the extension or telephone number to which you want to transfer the call
 If the called party answers, you may talk privately with them. To finish the transfer, hang up -or- press the Resume
softkey to cancel the transfer and return to the holding party. If the called party doesn’t answer, hang up to transfer
the call to that party’s voice mailbox
 press the Resume softkey to cancel the transfer and return to the holding party
 Note: Press the EndCall softkey to disconnect both the calling party and called party.
Call Features
Call Forward (All Calls)
Call Forward (All Calls) lets you forward incoming calls to another number.
 To enable/modify Call Forwarding using the menu:
 Press the CFwdAll softkey
 Enter the telephone number for the forwarding destination. When entering an external Forwarding Number, be
sure to include the Outside Access Digit.
 Press the EndCall softkey. The display will indicate that the line is forwarded and show the forwarding number.
To enable/modify Call Forwarding using Star Codes
 Lift the handset and dial 72*
 Enter the phone number for the forwarding destination followed by #. When entering an external
Forwarding Number, be sure to include the Outside Access Digit.
 Press # to confirm followed by 2 to exit
 Hang up

Cisco 7911 Specifications

General

Audio Codec Support	G.711, G.729a
Display	Monochrome
Ethernet	10/100Base-T Ethernet connection
Lines	1
Power	IEEE 802.3af Power over Ethernet (PoE)
Protocol Support	SIP