Cloud Voice Service
Version 1.0 ©Wharf T&T Limited 2013
6
3. Basic Features
3.1 Placing a Call
There are 4 options for placing a new call:
* If you wish to dial the call to external partner, please remember to add ”9” before the 8-digits
telephone number
3.2 Answering a Call
To answer an incoming call, lift up the handset.
3.3 Using Call Waiting
If you are enabled with call waiting for your phone, you will hear a call waiting tone and
the caller ID information will be shown on the phone’s LCD screen if a new call comes
in when you are on the phone.
1. To answer the new call, press the Answer soft key. When you do so, the
original call will be put on hold.
2. To return to the original call, press the Hold button.
3. If the second call is still active, the call will be put on hold when you return to the
original call.
4. You can continue to use the Hold button to switch between the calls.
To create a conference call between yourself and the other two parties, press the
Confrn soft key.
1. When using the handset, lift the handset and dial the number.
2. To make a new call on the current line, press the NewCall soft key and dial the
number.
3. To dial with the phone on hook, from the main screen, perform either of these
actions:
a) Dial the number and lift the handset or press the Dial soft key. The phone
will not produce a dial tone until after you lift the handset or press the Dial
soft key.
b) Press the NewCall soft key and dial the number.
4. To dial the last dialed number, press the Redial soft key.
To Next Page
Loading...
Need help?
General
