Cisco 7912 User Manual

Abbreviated Dial
14 System Telephone Features Cisco 7912 Telephone User Guide
620-05600350
5. Dial the phone number you want to assign to this Abbreviated Dial code,
followed by #.
The phone number you entered for this Abbreviated Dial number is repeated
back.
NOTE: Be sure to enter all the numbers normally required to dial the call. This includes
the area code for long distance calls and may include the area code for local calls
in some areas.
6. Press # to save or * to exit without saving.
7. Program or verify another Abbreviated Dial code or hang up to exit.
Using an Abbreviated Dial Code
1. Press *3 then the desired Abbreviated Dial code (00-99).
2. Press the Dial soft key or pickup the handset.
3. Wait for the called party to answer.
4. If you pressed Dial, pick up the handset and press the Hold button to talk.
Modifying an Abbreviated Dial Code
1. Press 75*.
2. Press the Dial soft key or pickup the handset.
A voice prompt will lead you through the remaining steps.
3. Press 1 to program (set) the Abbreviated Dial code (00-99).
4. Press the digits of the Abbreviated Dial code to modify followed by # or press
* to exit.
5. Dial the phone number you want to assign to this Abbreviated Dial code
followed by the # sign, or press * to cancel.
The phone number you entered for this Abbreviated Dial number is repeated
back.
NOTE: Be sure to enter all the numbers normally required to dial the call. This includes
the area code for long distance calls and may include the area code for local calls
in some areas.
6. Press # to save the changes or * to exit without saving.
7. Program or verify another Abbreviated Dial code or hang up to exit.

Cisco 7912 Specifications

General

Audio Codec Support	G.711, G.729a
Ethernet Ports	1 x 10/100Base-T Ethernet port
Protocol Support	SCCP
Power Options	Power over Ethernet (PoE), AC adapter
Lines	1 line