Cisco 7912

Managing the Selective Caller List
Cisco 7912 Telephone User Guide System Telephone Features 53
620-05600350
5. When you are done listening to numbers, press * to return to the main menu.
6. Select a menu item or hang up.
Deleting from the List
1. Press *88 on the telephone keypad.
A voice prompt tells you whether Privacy Guard is enabled or disabled and
then gives the menu choices.
2. Press 6 to delete the numbers in the Selective Call List.
3. Select from the available options:
• If you know the phone number you wish to delete, press 1.
• To hear a list of numbers to delete, press 2.
• To delete all numbers, press 3,
• To return to the main menu, press the * key
4. If you pressed 1, do the following:
a. Enter the number to remove.
b. Press # to remove or press * to cancel (return to the main menu).
c. If you pressed #, the system repeats the number you entered.
d. Press # to delete the entry or * to exit without saving.
e. Select a menu item or hang up.
5. If you pressed 2, do the following:
a. The first number in the Selective Call List is played.
b. Press 1 to delete the number or # to hear the next number.
c. Repeat these steps until you are finished deleting numbers.
d. Press * to exit.
e. Select a menu item or hang up.
6. If you pressed 3, all numbers in the list are immediately deleted and you
return to the main menu.
C A U T I O N
There is no confirmation for deleting all numbers in the Selective Call List.
As soon as you press 3 all numbers are deleted. Be very sure this is what
you want to do before pressing 3.
7. Select a menu item or hang up.