Cisco 7921G - Page 39

Basic Call Handling
Cisco Unified Wireless IP Phone 7921G for Cisco Unified Communications Manager 4.3, 5.1, 6.0 and Later 31
Tip
Obtain this information from your system administrator before using Mobile Voice Access to make a
call:
• Mobile Voice Access number
• End user PIN
Place a call using a billing or
tracking code
1. Dial a number.
2. Press .
3. After the tone, enter a client matter code
(CMC) or a forced authorization code
(FAC).
Your system
administrator
Place a call using your
Extension Mobility profile
1. Choose (Services) > EM Service
(name can vary).
2. Enter log in information.
Using Cisco Extension
Mobility, page 55
Make a call from a cellular
phone using Mobile Voice
Access
1. Dial your assigned Mobile Voice access
number.
2. Enter your cellular phone number (if
requested) and PIN.
3. Press 1 to make a call to an enterprise IP
phone.
4. Dial a wireless IP phone number other
than your wireless IP phone number.
Managing Business
Calls Using a Single
Phone Number,
page 56
Place a Push to Talk call. 1. Choose (Services) >Push to Talk
Service (name can vary).
2. Use or Talk to transmit.
3. Press or Stop to end.
Using Push to Talk
Service, page 58
If you want to... Then...
For more information,
see...