Cisco 7921G User Manual

Using a Handset, Headset, and Speakerphone
Cisco Unified Wireless IP Phone 7921G for Cisco Unified Communications Manager 4.3, 5.1, 6.0 and Later 59
Using a Handset, Headset, and Speakerphone
You can use your phone as a mobile handset, a speakerphone, with a headset, or with the
speakerphone in the desktop charger.
If you want to... Then...
Use the handset Press ; to hang up, press .
Use a headset Plug the headset connector into the headset port . The icon
displays on the phone status line. Place and answer calls as usual. If
you use AutoAnswer, see
Using AutoAnswer, page 61 for exceptions.
You can use the headset with all the
controls on your phone, including and .
The headset audio remains active when the headset is connected to
the phone.
Use the speaker mode Press and hold for one second before placing a call or during a
call to activate speaker mode. The icon displays when the
speaker is active.
Note Speaker mode remains active for future calls until toggled off.
Switch to the speaker (from
the handset) during a call
Press and hold for one second, and displays.
Press and hold to toggle back to the handset.

Cisco 7921G Specifications

General

Brand	Cisco
Model	7921G
Category	IP Phone
Language	English