68 OL-15163-01
Changing the Keypad Tones
You can enable or disable the tones when you press a key on your keypad.
Viewing Your Network Profile List
Network profiles provide predefined settings for access to the wireless network and for authentication
and encryption in your system. Your system administrator defines network profiles. You might have
more than one network profile available to you, so you can access wireless network configurations at
locations that use different SSIDs or authentication types.
Your Cisco Unified Wireless IP Phone 7921G can have up to four enabled network profiles. Your
phone automatically scans the profiles and selects the network profile with the matching SSID and
settings for that specific wireless network.
Note Consult with your system administrator if you need to have additional network profiles or
change settings in a profile.
Tips
• When the locked icon appears next to a menu, see your system administrator for information.
• If you need to change your EAP or LEAP username and password, see Setting Username and
Passwords, page 12, and consult with your system administrator.
Change the keypad tone level 1. Choose (Settings) > Phone Settings > Keypad Settings.
2. Select Keypad Tone.
3. Select one of the following:
• Disable—Plays no keypad tone.
• Normal—Plays tone when keys are pressed.
• Loud—Plays louder tone when keys are pressed.
The icon appears next to your selection.
4. Press Save to make the change or Cancel.
If you want to... Then...
View the list of enabled
Network Profiles
Choose (Settings) > Network Profiles.
The enabled profiles have the next to them.
Note Because Network profiles are locked, your system administrator
must make changes for you.
To Next Page
Loading...
Need help?
General
