Cisco 7921G User Manual

Basic Call Handling
Cisco Unified Wireless IP Phone 7921G for Cisco Unified Communications Manager 4.3, 5.1, 6.0 and Later 33
Tips
• To use any button to answer a call, see Changing Keypad Settings, page 66.
• You can answer an incoming call even when the keypad is locked.
Ending a Call
To end a call, simply disconnect. Here are some more details.
Automatically connect to an
incoming call after a ring or
two
Ask your system administrator to set
up the Auto Answer feature. After
ringing once or twice, the call
automatically connects to the handset
or headset without pressing
.
Using AutoAnswer, page 61
Answer a call on your
cellular phone or other
remote destination
Set up Mobile Connect and answer
your phone.
When you enable Mobile Connect:
Your Cisco Unified Wireless IP Phone
7921G and remote destinations receive
calls simultaneously.
When you answer the call on your
Cisco Unified Wireless IP Phone
7921G, the remote destinations stop
ringing, are disconnected, and display
a missed call message.
When you answer the call on one
remote destination, the other remote
destinations stop ringing, are
disconnected, and a missed call
message is shown on the other remote
destinations.
Managing Business Calls
Using a Single Phone Number,
page 56
If you want to... Then...
End the call Choose , EndCall, or Options > EndCall.
Disconnect one call but preserve
another call on the same line
Choose EndCall or Options > EndCall. If necessary, remove
the call from hold first.
If you want to... Then... For more information, see...

Cisco 7921G Specifications

General

Brand	Cisco
Model	7921G
Category	IP Phone
Language	English