Cisco 7925G - Page 10

Step 2
To install the battery, insert the battery catches in the corresponding slots at the bottom of the Cisco Unified
Wireless IP Phone. Ensure that the metal contacts on the battery and the phone are facing each other.
Step 3
Press the battery to the body of the phone until it locks into place. See the following figure.
Figure 2: Install the Battery
Battery insertion slots1
Battery2
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
10
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Setup
Phone Power