Cisco 7941G - Unified IP Phone VoIP User Manual

4-41
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Ta b l e 4-14 Network Configuration Menu Options
Option Description To Change
Load Server Used to optimize installation time for phone
firmware upgrades and offload the WAN by
storing images locally, negating the need to
traverse the WAN link for each phone's upgrade.
You can set the Load Server to another TFTP
server IP address or name (other than the TFTP
Server 1 or TFTP Server 2) from which the phone
firmware can be retrieved for phone upgrades.
When the Load Server option is set, the phone
contacts the designated server for the firmware
upgrade.
Note The Load Server option allows you to
specify an alternate TFTP server for phone
upgrades only. The phone continues to use
TFTP Server 1 or TFTP Server 2 to obtain
configuration files. The Load Server
option does not provide management of
the process and of the files, such as file
transfer, compression, deletion, and so on.
From Cisco Unified
Communications Manager
Administration,
Device > Phone >
Phone Configuration.
RTP Control
Protocol
Indicates whether the phone supports the Real
Time Control Protocol. Settings include:
Enabled
Disabled—default
If this feature is disabled, several call statistic
values display as 0. For additional information,
see the following sections:
• Call Statistics Screen, page 7-16
• Streaming Statistics, page 8-14
From Cisco Unified
Communications Manager
Administration, choose
Device > Phone >
Phone Configuration.

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English