Cisco 7941G - Unified IP Phone VoIP User Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Security Configuration Menu
4-50
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
802.1X Authentication and Status
The 802.1X Authentication and 802.1X Authentication Status menus allow you to
enable 802.1X authentication and monitor its progress. These options are
described in
Table 4-18 and Table 4-19.
You can access the 802.1X Authentication settings by pressing the Settings button
and choosing Security Configuration > 802.1X Authentication.
To exit these menus, press the Exit softkey.
Ta b l e 4-17 Trust List Menu Settings
Option Description To Change
CAPF Server IP address of the CAPF used by the
phone. Also displays a certificate icon
if a certificate is installed for this
server.
For more information about this file, refer
to the “Configuring the Cisco CTL
Client” section in Cisco Unified
Communications Manager Security
Guide.
CallManager/
TFTP Server
IP address of up to five Cisco Unified
Communications Manager and TFTP
servers used by the phone. Also
displays a certificate icon
if a
certificate is installed for this server.
For more information about this file, refer
to the “Configuring the Cisco CTL
Client” section in Cisco Unified
Communications Manager Security
Guide.
SRST Router IP address of the trusted SRST router
that is available to the phone, if such a
device has been configured in Cisco
Unified Communications Manager
Administration. Also displays a
certificate icon
if a certificate is
installed for this server.
For more information about this file, refer
to the “Configuring the Cisco CTL
Client” section in Cisco Unified
Communications Manager Security
Guide.

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English