Cisco 7941G - Unified IP Phone VoIP User Manual

Chapter 3 Setting Up the Cisco Unified IP Phone
Configuring Startup Network Settings
3-18
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
If the phone successfully passes through these stages, it has started up properly.
If the phone does not start up properly, see the
“Resolving Startup Problems”
section on page 9-2.
Configuring Startup Network Settings
If you are not using DHCP in your network, you must configure these network
settings on the Cisco
Unified IP Phone after installing the phone on the network:
• IP address
• IP subnet mask
• Default gateway IP address
• TFTP server IP address
• You also may configure the domain name and the DNS server settings, if
necessary.
Collect this information and see the instructions in Chapter 4, “Configuring
Settings on the Cisco Unified IP Phone.”
Configuring Security on the Cisco Unified IP Phone
The security features protect against several threats, including threats to the
identity of the phone and to data. These features establish and maintain
authenticated communication streams between the phone and the
Cisco
Unified Communications Manager server, and digitally sign files before
they are delivered.
For more information about the security features, see the “Understanding Security
Features for Cisco Unified IP Phones” section on page 1-13. Also, refer to Cisco
Unified Communications Manager Security Guide.
A Locally Significant Certificate (LSC) installs on phones after you perform the
necessary tasks that are associated with the Certificate Authority Proxy Function
(CAPF). You can use Cisco
Unified Communications Manager Administration to
configure an LSC, as described in Cisco Unified
Communications Manager
Security Guide.

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English