Cisco 7941G - Unified IP Phone VoIP User Manual

3-3
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 3 Setting Up the Cisco Unified IP Phone
Understanding the Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Components
If you plan to use auto-registration, verify that it is enabled and properly
configured in Cisco
Unified Communications Manager before connecting any
Cisco
Unified IP Phone to the network. For information about enabling and
configuring auto-registration, refer to Cisco Unified
Communications Manager
Administration Guide. Also, see the
“Adding Phones to the Cisco Unified
Communications Manager Database” section on page 2-14.
You must use Cisco Unified Communications Manager to configure and assign
telephony features to the Cisco
Unified IP Phones. See the “Telephony Features
Available for the Cisco Unified IP Phone” section on page 5-2 for details.
In Cisco Unified Communications Manager, you can add users to the database
and associate them with specific phones. In this way, users gain access to web
pages that allow them to configure items such as call forwarding, speed dialing,
and voice messaging system options. See the
“Adding Users to Cisco
Unified Communications Manager” section on page 5-30 for details.
Understanding the Cisco Unified
IP
Phone 7961G/7961G-GE and 7941G/7941G-GE
Components
The Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE include
these components on the phone or as accessories for the phone:
• Network and Access Ports, page 3-3
• Handset, page 3-4
• Speakerphone, page 3-5
• Headset, page 3-5
Network and Access Ports
The back of the Cisco Unified IP Phone 7961G/7961G-GE and
7941G/7941G-GE includes these ports:
• Network port
– labeled 10/100 SW on the 7961G and 7941G

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English