Cisco 7941G - Unified IP Phone VoIP User Manual

Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
5-4
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Auto-pickup Allows a user to use one-touch, pickup
functionality for call pickup, group call
pickup, and other group call pickup.
For more information, refer to:
• Cisco Unified
Communications Manager
Administration Guide,
“Pickup Group Configuration”
chapter.
• Cisco Unified
Communications Manager
System Guide, “Call Pickup
and Group Call Pickup”
chapter.
Barge Allows a user to join a non-private call on a
shared phone line. Barge features include
cBarge and Barge.
• cBarge adds a user to a call and
converts it into a conference, allowing
the user and other parties to access
conference features.
• Barge adds a user to a call but does not
convert the call into a conference.
The phones support Barge in two
conference modes:
• Built-in conference bridge at the target
device (the phone that is being barged).
This mode uses the Barge softkey.
• Shared conference bridge. This mode
uses the cBarge softkey.
For more information, refer to:
• Cisco Unified
Communications Manager
Administration Guide, “Cisco
Unified IP Phone
Configuration” chapter.
• Cisco Unified
Communications Manager
System Guide, “Cisco Unified
IP Phones” chapter.
• Cisco Unified
Communications Manager
Features and Services Guide,
“Barge and Privacy” chapter.
Block external to
external transfer
Prevents users from transferring an external
call to another external number.
For more information, refer to
Cisco Unified Communications
Manager Features and Services
Guide, “External Call Transfer
Restrictions” chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English