5-7
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Call pickup Allows users to redirect a call that is ringing
on another phone within their pickup group
to their phone.
You can configure an audio and/or visual
alert for the primary line on the phone. This
alert notifies the users that a call is ringing
in their pickup group.
For more information, refer to:
• Cisco Unified
Communications Manager
Administration Guide, “Call
Pickup Group” chapter.
• Cisco Unified
Communications Manager
Features and Services Guide,
“Call Pickup Group” chapter.
Call recording Allows a supervisor to record an active call.
The user might hear an intermittent tone
(beep tone) during a call when it is being
recorded.
Note The intercom feature is disabled
when a call is being monitored or
recorded.
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, “Monitoring and
Recording” chapter.
Call waiting Indicates (and allows users to answer) an
incoming call that rings while on another
call. Displays incoming call information on
the phone screen.
For more information, refer to the
Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference
To Next Page
Loading...
