5-11
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Directed Call Park Allows a user to transfer an active call to an
available directed call park number that the
user dials or speed dials.
For more information refer to:
• Cisco Unified
Communications Manager
Features and Services Guide,
“Call Park and Directed Call
Park” chapter.
Direct transfer Allows users to connect two calls to each
other (without remaining on the line).
For more information, refer to
Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter.
Do Not Disturb
(DND)
When DND is turned on, no audible rings
occur during the ringing-in state of a call.
You can configure the phone to have a
softkey template with a DND softkey or a
phone-button template with DND as one of
the selected features.
The following DND-related parameters are
configurable in Cisco
Unified
Communications Manager Administration:
• Do Not Disturb—This checkbox allows
you to enable DND on a per-phone
basis. Choose Device > Phone > Phone
Configuration.
• DND Incoming Call Alert—Choose the
type of alert to play on a phone for
incoming calls when DND is active.
This parameter is located on both the
Common Phone Profile window and the
Phone Configuration window
(Configuration window value takes
precedence).
• Include DND In BLF Status—Enables
DND status to override busy/idle state.
Cisco Unified Communications
Manager Features and Services
Guide, “Do Not Disturb” chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference
To Next Page
Loading...
