Cisco 7941G - Unified IP Phone VoIP User Manual

7
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Contents
Adding Phones with Cisco Unified Communications Manager
Administration 2-17
Adding Phones with BAT 2-18
Using Cisco Unified IP Phones with Different Protocols 2-19
Converting a New Phone from SCCP to SIP 2-19
Converting an In-Use Phone from SCCP to SIP 2-20
Converting an In-Use Phone from SIP to SCCP 2-20
Deploying a Phone in an SCCP and SIP Environment 2-21
Determining the MAC Address for a Cisco Unified IP Phone 2-21
CHAPTER 3 Setting Up the Cisco Unified IP Phone 3-1
Before You Begin 3-2
Network Requirements 3-2
Cisco Unified Communications Manager Configuration 3-2
Understanding the Cisco Unified IP Phone 7961G/7961G-GE and
7941G/7941G-GE Components 3-3
Network and Access Ports 3-3
Handset 3-4
Speakerphone 3-5
Headset 3-5
Audio Quality Subjective to the User 3-6
Connecting a Headset 3-6
Disabling a Headset 3-6
Using External Devices with Your Cisco Unified IP Phone 3-6
Installing the Cisco Unified IP Phone 3-7
Attaching the Cisco Unified IP Phone Expansion Module 7914 (SCCP Phones
Only) 3-11
Adjusting the Placement of the Cisco Unified IP Phone 3-13
Adjusting Cisco Unified IP Phone Placement on the Desktop 3-13
Securing the Phone with a Cable Lock 3-13

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English